Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and Setting
Timer setting with automatic switch-off of cooking zones
To set the timer so that a cooking zone is automatically
switched off after a set time, proceed as follows:
• Touch the selection key of the cooking zone,
for which you want to activate the switch-off timer
and set the desired power level, if not already done.
• While the cooking zone display is flashing,
touch the timer key
The timer display shows
• As long as the tens digit is flashing,
adjust it as required using the
Note: The slider is not used to set the timer,
but only for setting the power levels.
• After 3 seconds without any further input, the tens
setting is automatically confirmed and the ones digit
starts to flash.
Also adjust it with the
• After another 3 seconds without further input, the display
stops flashing and the set time is automatically confirmed.
The countdown starts and the timer display shows the
remaining time.
To mark the selected zone, a dot lights up
next to the corresponding power display.
CAUTION!
Risk of injury and fire!
Unattended cooking can boil over,
burn and catch fire!
Do not use the timer for unattended cooking!
• After the set time has elapsed, the corresponding cooking
zone is switched off automatically.
Note on the operation of further cooking zones
Other cooking zones remain unaffected
by the timer and stay in operation, if applicable.
40
.
.
and
and
keys as required.
keys.
Werbung
