Herunterladen Inhalt Inhalt Diese Seite drucken

Grundig RCD 8300 Handbuch Seite 6

Vorschau ausblenden Andere Handbücher für RCD 8300:
Inhaltsverzeichnis

Werbung

GRUNDIG Service
11. Display zerlegen
- Display ausbauen (Pkt. 10).
d
- 6 Schrauben
(Fig. 12) herausschrauben und das Display-
Gehäuse öffnen (Steckverbinder bei Bedarf öffnen).
e
- 4 Schrauben
(Fig. 13) herausschrauben und Display-Leiter-
platte entnehmen.
12. Tastatur zerlegen
- Display ausbauen (Pkt. 10).
f
- 5 Schrauben
(Fig. 12) herausschrauben und das Tastatur-
Gehäuse öffnen (Achtung auf die beiden Bolzen mit Federn
(Fig. 14); Steckverbinder bei Bedarf öffnen).
Fig. 13
g
e
11. Disassembling the Display
- Remove the Display (para 10).
d
- Undo 6 screws
(Fig. 12) and open the display housing (open
connectors if necessary).
e
- Undo 4 screws
(Fig. 13) and remove the Display PCB.
11. Disassembling the Keyboard
- Remove the Display (para 10).
f
- Undo 5 screws
(Fig. 12) and open the keyboard housing (watch
out for the 2 bolts with springs
necessary).
1 - 6
Fine Arts Audion
g
(Fig. 14); open connectors if
g
Fig. 14

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lsp 2Lsp 3Glk0650Gnk0752

Inhaltsverzeichnis