Connection Of Behnke Touch Display To Basic Electronics 20-0003-Bs; 20-0015-Bs/20-0017-Bs Using The Display Connection Cable (Ribbon Cable) In The Basic Electronics - Telecom Behnke 20-2006-BS Anleitung

Instructions Behnke touch display 20-2006-BS, 21-2006-BS, 50-2006-BS, 43-9566-BS
GB
Mounting

2.2. Connection of Behnke touch display to basic electronics 20-0003-BS/

20-0015-BS/20-0017-BS using the display connection cable (ribbon cable)
in the basic electronics
2.2.1. Open the display cover on the rear to
connect the ribbon cable. Make sure that the
display is appropriately mounted in the Behnke
module frame. For reverse-side mounted touch
displays (43-9566-BS), please ensure a firm
and flush seat in the mounted structure.
2.2.2. Carefully open the connector on the dis-
play board that has now become visible. Open
the cable locks in parallel on both sides at the
same time.
20 www.behnke-online.de