Velleman VTTEST22 Bedienungsanleitung Seite 12

Verfügbare Sprachen

VTTEST22

If there is no indicator, leave test probe L2- (1) on the protective ground

and insert test probe L1+ (2) into the second conductor contact of the

outlet. There should now be a voltage indication. If there is no voltage

indication, check the installation to ensure its proper operation.

Use this device with original accessories only. Velleman group nv

cannot be held responsible in the event of damage or injury

resulting from (incorrect) use of this device. For more info

concerning this product and the latest version of this manual, please

visit our website www.velleman.eu. The information in this manual

is subject to change without prior notice.

The copyright to this manual is owned by Velleman Group nv. All

worldwide rights reserved. No part of this manual may be copied,

reproduced, translated or reduced to any electronic medium or otherwise

without the prior written consent of the copyright holder.

V. 01 – 09/10/2023