Experts Menu - STIEBEL ELTRON RTU-S UP Stiebel Bedienungs- Und Installationsanleitung

6. Experts menu

Depressing the right touch key and keeping it depressed for 10 seconds after accessing
the "settings" submenu (see 5.) from the main menu enables to call the experts menu.
Caution! This menu enables to make control settings that may only be performed by a
qualified heating specialist or an expert electrician. The settings made while operating
in this mode cannot be reset via the reset function and have to be made knowingly,
therefore.
The following settings are available:
1. Language
The operator can select between the following languages: German, English, French,
Dutch, Polish, Czech and Russian.
2. Measuring correction
The measured temperature value can be adjusted within a range from -5K to +5K at
0.1K steps. At the same time, the uncorrected value is being indicated on the display.
Factory setting 0.0
3. Reset function
Actuating this function resets all settings made outside of the experts menu (except for
time and date) to the condition as delivered.
4. Entry of the connected load
In order to allow to compensate the self heating of the RTU-S UP, the power
consumption of the connected consumer needs to be entered. The power consumed in
consequence of the connected heating load is indicated in kW and can be adjusted
within a range from 0.1 to 2.3. With intermediate values, the nearest lower value needs
to be set. If actuating valves instead of controlling an electric heating system, the low
power consumption of these valves can be neglected, so that no changes need to be
made.
Factory setting: 0.1
33