Install Basicload Software; Configure Basic-Load Software; Performing An Update - Fronius LocalNet RS 232 Bedienungsanleitung

3
Install BASI-
1
CLoad software
2
3
Configure BASIC-
1
Load software
2
3
Performing an
update
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
IMPORTANT! The latest firmware is available from the DownloadCenter (https://
www.fronius.com/de/schweisstechnik/downloads)
1
2
3
Close LocalNet Server Professional
Insert the software tools CD into the CD drive or download the BASICLoad_VX.XX.X
file from the DownloadCenter (https://www.fronius.com/en/welding-technology/down-
loads).
Execute the BASICLoad_VX.XX.X.exe file
Follow the instructions in the installation wizard
- BASICLoad is installed
Execute the BASICLoad setup file - in the start menu under „Fronius Product Group"
Select „LocalNet" from the C167 (UST) dropdown menu
Close BASICLoad setup
WARNING!
After switching on the system components, ensure that the relevant system compo-
nent is not activated.
Connect the system components
Switch on the system components
Double click on the firmware to be installed
- BasicLoad starts
- The displays on the interface flash
13