Electrolux EB6GL4SP Benutzerinformation Seite 10

6.5 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
6.6 The menus in overview
Main menu
Symbol / Menu
item
Heating Functions
Recipes
Favourite Programme
Basic Settings
Specials
VarioGuide
Submenu for: Basic Settings
Symbol / Menu
item
Set Time of Day
Time Indication
Fast Heat Up
Set + Go
10 ENGLISH
Application
Contains a list of heating
functions.
Contains a list of automatic
programmes.
Contains a list of favourite
cooking programmes created
by the user.
Used to set the appliance
configuration.
Contains a list of additional
heating functions.
Contains recommended oven
settings for a wide choice of
dishes. Select a dish and
start the cooking process.
The temperature and time
are only guidelines for a bet‐
ter result and can be adjus‐
ted. They depend on the rec‐
ipes and the quality and
quantity of the used ingredi‐
ents.
Description
Sets the current time on the
clock.
When ON, the display shows
the current time when you
deactivate the appliance.
When ON, the function de‐
creases the heat-up time.
To set a function and activate
it later with a press of any
symbol on the control panel.
Symbol / Menu
item
Heat + Hold
Time Extension
Display Contrast
Display Brightness
Set Language
Buzzer Volume
Key Tones
Alarm/Error Tones
DEMO mode
Service
Factory Settings
6.7 Heating Functions
Heating function Application
To bake on up to three shelf
positions at the same time and
to dry food. Set the tempera‐
True Fan Cooking
ture 20 - 40 °C lower than for
the function: Conventional
Cooking.
Description
Keeps the prepared food
warm for 30 minutes after a
cooking cycle finished.
Activates and deactivates the
time extension function.
Adjusts the display contrast
by degrees.
Adjusts the display bright‐
ness by degrees.
Sets the language for the dis‐
play.
Adjusts the volume of press-
tones and signals by de‐
grees.
Activates and deactivates the
tone of the touch fields. It is
not possible to deactivate the
tone of the ON / OFF touch
field.
Activates and deactivates the
alarm tones.
Activation / deactivation
code: 2468.
Shows the software version
and configuration.
Resets all settings to factory
settings.