Grundig MF 2050 BT DAB+ Bedienungsanleitung Seite 14

WALL MOUNTING
In order to prevent injuries, the hi-fi system must
be securely fasten to the wall in accordance with
the below installation instructions.
Caution:
The ground must be firm and capable of
7
handling the load.
Use mountings that are appropriate for the
7
weight of the device.
For wooden or hollow wall structures use
7
suitable plugs and screws. Seek advice from
a specialist dealer.
Warning:
In order to prevent injuries, the device must
7
be securely fastened to the wall in accord-
ance with the installation instructions.
Note:
Installation of the hi-fi system WMS 3000 BT
7
DAB+, MF 2050 BT DAB+ for professional
use (e.g. in a bistro) must only be carried
out by an electrically qualified person, in ac-
cordance with the applicable construction
regulations as per VDE 0100.
1 Drill the two holes(about 6mm diameter ) in the
wall and keep the distance between drill holes
of the sound bar is 181.2mm (Diagram 1).
181,2mm
(Diagram 1)
-----------------------------------------------------------------------------------------------------
2 Insert the two plugs supplied into two drilled
holes and then insert two screws supplied into
two holes and tighten (Diagram 2).
3
Take care to leave 4 mm between the screw
heads and wall (Diagram 3).
4 Use the assembled hi-fi system to hang on the
setscrews on the wall (Diagram 4).
(Diagram 2)
(Diagram 3)
(Diagram 4)
ENGLISH
13