Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
In case of using a drive with 3 stripped wires, use
the extension cable "TL 25 WT Cable+C" reference
9027507A.
2.3. COMMISSIONING
Restore the power supply,
Setting the end limits
The end of travel limits can be set in any order.
2.3.1. Setting the lower end limit
1) Press the Prog. button for two secondsLower
m
end limit
Lower end limit
Setting tool control unit
2) Press the Down
the desired position is reached.
Adjust the position, if necessary, using the Up
k
k
and Down
3) Press the OK button until there is an up and
down movement of the motorized product,
the OK push-button indicator light lights up
and then goes out, the lower position is set.
©
40
Copyright
. The Prog. LED indicator light
f
f
lights up, the TL 25 WT
b
b
is active.
k
k
button and release it when
buttons
.
2020 - 2022 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
TL 25 WT Setting tool
RESET
Prog
Prog
UP
Down
Up
OK
Down
ON
RESET
Prog
Prog
UP
Down
Up
OK
Down
1)
2 s
2)
3)
i
Werbung
