Key To Machine Components; Preliminary Operations - Saeco SUP 018M Gebrauchsanweisung

22

Key to machine components

Coff ee bean hopper
Coff ee bean hopper cover
Grinder adjustment knob
Grill
Main power button (ON/OFF)
Water tank cover
Water tank
Grounds drawer
Power cable
Drip tray
Height-adjustable dispensing spout
Steam/hot water spout with pannarello
Front door
Steam knob
Coff ee Brew Group
Cleaning brush
Control panel
Coff ee dose per cup adjustment knob
Coff ee button
Temperature ready / coff ee function light
Steam function button
Steam temperature light
Alarm light
Machine on light
4 INSTALLATION
For your safety and other people's safety, carefully
follow the "Safety Regulations" in section 3.
4.1 Packaging
The original packaging has been designed and constructed to
protect the machine during transport.
We recommend keeping the packaging material for possible
future transport.
4.2

Preliminary Operations

• Remove the drip tray (10) with grill (4) from the packa-
ging.
• Remove the coff ee machine from the packaging and
position it in a proper place in compliance with the requi-
rements described in the safety regulations (section 3).
• Insert the drip tray (10) into the appropriate seat. Make
sure that the drip tray, the coff ee grounds drawer (8) and
the coff ee brew unit (15) are correctly placed and that the
front door (13) is closed.
• Fit the cover of the coff ee bean hopper (2) onto the coff ee
bean hopper (1). Keep the cleaning brush (16) to hand.
• Before plugging in the machine, make sure that the power
button (5) is switched to -0-.
If the red light (22) fl ashes when the machine is turned on, it
means that one of the above mentioned parts is not placed
correctly.
Important Note: Carefully read the expla-
nation of all the warnings displayed by the
machine to the user by means of the lights on the
control panel (section 12).
• (Fig.25) - Lift and extract the water tank (7) and remove
the cover (6). Rinse and fi ll it with fresh water taking
care not to overfi ll it. Reinsert the water tank into the
appropriate seat and replace the cover (6) on top of it.
Always use only fresh, non-sparkling water to
fi ll the tank (7). Hot water or any other liquid
may damage the tank and/or the machine. Do not turn
on the machine without water: make sure there is
enough water in the tank.
INSTALLATION