Herunterladen Inhalt Inhalt Diese Seite drucken

Circuit Priming; Using The Machine For The Fi Rst Time Or After A Period Of Inactivity - Saeco SUP 018M Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für SUP 018M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
INSTALLATION
• (Fig.24) - Remove the cover (2) and add the coff ee beans.
Always add only coff ee beans in the coff ee bean
hopper (1). Ground coff ee, instant coff ee or any
other object may damage the machine.
• Replace the cover (2) on the coff ee bean hopper (1).
• Insert the plug into a suitable socket.
4.3

Circuit Priming

In the beginning, after dispensing steam or when the water
tank is empty, the machine's water circuit must be primed.
• The power button (5) is switched to -0-. Press button (5)
to turn on the machine. The light (23) on the control panel
will turn on.
• (Fig.26) - Place a container beneath the steam wand
(Pannarello)(12) to prime the circuit. Turn the knob (14)
counter-clockwise and wait until water fl ows steadily
out of the steam wand (Pannarello). Turn the knob (14)
clockwise to stop water dispensing.
• The circuit is now primed.
4.4
Using the machine for the fi rst time
or after a period of inactivity
This simple operation ensures optimum brewing and must
be performed:
- At fi rst start-up;
- When the machine remains inactive for a long time (more
than 2 weeks).
Dispensed water must be emptied into an
adequate drain. It is not suitable for food use.
If the container fi lls up, stop dispensing water during
the cycle and empty it before resuming the operation.
1 (Fig.25) - Make sure that the water tank (7) is fi lled with
drinking water; otherwise, empty the tank and replace
with fresh water.
2 Place a container beneath the steam wand (Pannarello)
(12) and turn the knob (14) counter-clockwise.
3 After 30 seconds (or when the container is full) stop
dispensing water by turning the knob (14) clockwise.
4 Wait about 60 seconds. Repeat the operations from step 2
until emptying out the tank.
5 (Fig.25) - Once run out of water, fi ll the tank again (7)
and carry out a new cycle from step (2) as previously
mentioned.
6 Once emptied the tank for the second time, fi ll it again
with water; the machine is now ready for use.
Note: if required, prime the circuit.
• To brew coff ee, dispense hot water or steam, and for a pro-
per use of the machine, carefully follow the instructions
provided.
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis