Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Information
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
DO NOT DISCARD – GIVE TO USER
Signs and stickers
The product is fitted with signs and stickers containing impor-
tant information about personal safety and product mainte-
nance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.
Useful information
Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
6
© Atlas Copco Industrial Technique AB - 9836 2377 00
Atlas Copco offers extended warranty and state of the art pre-
ventive maintenance through its ToolCover contracts. For fur-
ther information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains technical information for all
hardware and software products such as:
- Safety Information including declarations, standards and di-
rectives
- Technical data
- Installation, Operation and Service Instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available at:
https://servaid.atlascopco.com
For further information contact your local Atlas Copco repre-
sentative.
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
For more information, consult the website:
www.atlascopco.com
Choose Products - Safety Data Sheets, and follow the in-
structions on the page.
Caractéristiques techniques
Données produit
Pression de service maximum
Vitesse à vide
Déclarations
Remarque
De nombreux événements dans l'environnement d'exploitation
peuvent affecter le processus de serrage et nécessiteront une
validation des résultats. Conformément aux normes et règle-
ments applicables, nous vous invitons par la présente à con-
trôler le couple installé et le sens de rotation après tout évène-
ment susceptible d'avoir une incidence sur le résultat du ser-
rage. Voici des exemples non exhaustifs de ces évènements :
• installation initiale du système d'outillage
• modification de lot de pièces, boulon, lot de vis, outil,
logiciel, configuration ou environnement
• modification des branchements pneumatiques ou élec-
triques
EP6XS HR10
7.0 bar
(100 psi rel.)
8000 tr/min
( rpm)
Werbung
