EN
If the product in question reacts correctly, press the touch-sensitive
key corresponding to validate
If the product in question does not react correctly, press the touch-
sensitive key corresponding to do not validate
previous steps again.
If you press on
, the paired product is displayed on the right of the
start screen.
Repeat as many times as necessary to pair all RTS products on the
®
V
350 monitor.
6.1.3 Responding to a visitor
The
pictogram flashes, the ring tone sounds and the screen below is displayed when a visitor presses the call button on
the door station:
Note: if the occupant does not answer the call, the monitor records a photo of the visitor before terminating the ring tone.
To take the call, press the "communication" pictogram:
The
pictogram remains lit throughout the call. To end the communication, click on it again, open the gate or activate
the electric lock.
Note: if no action is taken, the maximum duration of the communication is 2 minutes.
13
.
to begin the
V®350 video entry phone
Copyright© 2021 SOMFY ACTIVITES SA. All rights reserved.