OHAUS Defender 6000 Serie Bedienungsanleitung Seite 56

EN-54
Wireless setup
Menu Sub-Menu
Reset
Type
IP Address[Wifi]
Device name[bt]
Wireless
wW.I.-B.t
Alt Pirnt CMD
Alt Tare CMD
Alt Zero CMD
End
MAC Address
The Medium Access Control (MAC) Address of the Wi-Fi/Bluetooth is not editable.
Port
The default value of IP port is 6060.
DHCP
If DHCP is set to be ON, the IP share or router will automatically assign IP Address. If the DHCP is set to be
OFF, users need to setup the IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS. If there
is no DHCP server in the network, the DHCP server of the Ethernet option board will become it.
Note: After the setup of IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS, please reboot
the indicator to enable the setting.
IP Address
IP is 192.168.1.2 by default.
Subnet Mask
Subnet mask is 255.255.255.0 by default.
Gateway
Gateway is 192.168.1.1 by default.
Primary DNS & Secondary DNS
DNS value is not needed when the system connects to a LAN, and it is assigned by the ISP when connected to
the internet.
Alternative Command
The alternative command of Print, Tare, Zero can be set to 'a' ~ 'z' or 'A' ~ 'Z'.
Note: The submenu will display after the installation of the dongle.
Print Setup
For Wi-Fi and Bluetooth printing setup, please refer to the Print Menu section in the Communication part for
details about printing settings.
Bluetooth setup
To pair your device with the terminal through Bluetooth, take Windows 10 as an example:
Click Settings in the Start menu.
1.
2. Select Devices (Bluetooth, printers, mouse) in the pop out Settings window or type Bluetooth in the
search bar of the window to launch Bluetooth & other devices program.
Click Add Bluetooth or other device.
3.
4. Select Bluetooth in the pop up Add a device window.
5. Select the Bluetooth name of your terminal to pair, and then check the pin code appeared with it.
6. Input the pin code through the numeric keyboard on your terminal.
7. If Your device is ready to go appears on your computer, it implies the connection is successful.
Sub-Menu ( in
segment)
rESEt
tYPE
Pincode[bt]
ALt.P
ALt.t
ALt.Z
END
Options
No, Yes
wifi, bluetooth
XXXXXX-XXXX
IP.ADDr
(169.254.1.1-6060)
XXXXXX
D.NAmME
XXXXXX
PIN
A~Z, P
A~Z, T
A~Z, Z
\
Defender 6000 Indicators
Options ( in segment)
NO, YES
wWIFI, BLUEtH
/
/
/
/
/
/
/