Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN-10
3.
Once all connections are made, re-attach the front housing.
i-DT61XWE
1.
Remove the four hex head screws from the bottom housing.
2.
Open the housing by carefully pulling the bottom housing backward.
3.
Once all connections are made, re-attach the bottom housing.
Note: The screws should be tightened to 2.5 N•m (20-25 in-lb) torque to ensure a watertight seal.
Defender 6000 Indicators
Werbung
