Herunterladen Inhalt Inhalt Diese Seite drucken

Test Stands (Optional) - PCE Instruments PCE-FG 20SD Bedienungsanleitung

Kraftaufnehmer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The 16-digit data stream will be displayed in the following format:
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
D0
D1 bis D8
D9
D10
D11 & D12
D13
D14
D15
RS232 Format, 9600, N 8, 1
Baud rate
Parity
Start bit
Stop bit

12. Test stands (optional)

The best measurement results are achieved when you use the device with one of the optional test stands.
For secure mounting on the test stand, there are two mounting drill-holes on the rear side of the device
(3-13 Fig.1). You may find more information on the available test stands on
www.pce-instruments.com/english.
Manual
End word
Display, D1 = LSD, D8 = MSD
Example:
When the display indicates 1234, D1 to D8 is 1234
Decimal point (DP), position from right to left
0 = no DP, 1 = 1 DP, 2 = 2 DP, 3 = 3 DP
Polarity
0 = positive, 1 = negative
Display element:
g = 57, N = 59, oz = 58, Kg = 55, LB = 56
1
4
Start word
9600
No
8
1
13

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis