Characteristics; Specifications - PCE Instruments PCE-FG 20SD Bedienungsanleitung

1. Characteristics

- Measuring range 0 - 20 kg, highest resolution and accuracy
- Maximum value registration
- Adjustable memory interval
- Large LCD display with backlight
- Measured values can be transmitted to the computer as an Excel file
- 3 display units: kg, lb, N
- Measuring possibilities for tensile and compressive forces
- Maximum value can be held on the display
- Zeroing for all modes possible
- Display direction: forward / reverse
- The device can be attached to a test stand (optional)
- Low battery consumption / mains adaptor optional
- Battery indicator
- Microprocessor circuit
- Overload protection

2. Specifications

Display
Display direction
Functions
Peak hold
ZERO
Measuring range
Resolution
Min. display value
Accuracy
Units
Sampling rate
Overload protecion
Max. load
Power supply
Operating temperature
Operating humidity
Dimensions
Weight
Normal measuring
mode
Saving interval
Sampling rate in Peak
Hold mode
Memory capacity
Further settings
Manual
5-digit, 16 mm LCD, backlight
Selectable via button on the front side
Tensile and compressive force measurement
Stores maximum value (max. load)
For normal and maximum value mode
20 kg / 44.10 lb / 196.10 N
0.01 kg / 0.01 lb / 0.02 N
0.02 kg / 0.07 lb / 0.3 N
±(0.5 % of the display value + 2 digits) at 18 ... 28 °C
Kg, N, lb
Every 0.2 s in quick mode / every 0.6 s in slow mode
Shows „- - - -" in case of overload
30 kg / 66.10 lb / 294.10 N
6 x 1.5 V AA battery or DC 9V adaptor
0...50 °C
<80 % RH
215 x 90 x 45 mm
650 g
Auto data acquisition
Manual data registration
10 ms .... 500 ms, in steps of 10 mS
1000 values
- SD card
- Data / time (year / month / day / hour / minute / second)
- Saving interval / sampling
- Auto power off
- Warning or beeper (on / off)
Adjustable, 1 s ... 9 h
(saving interval can be set to 1 second,
but this may lead to data loss)
Measurement when the recording button
is pressed
(set the saving interval to 0 seconds)
(in manual mode, the memory position
numbers 1-99 can be selected)
3