Herunterladen Diese Seite drucken

Bosch Move BHN20110 Gebrauchsanleitung Seite 38

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
en
Fold out the picture pages!
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be fully charged (until
the charging indicator goes out).
1
Fig.
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator will light up.
Once the batteries are fully charged, charging will
automatically stop and the charging indicator will go
out, even if the charging cable is still connected to
the mains power supply.
If the charging cable is disconnected from the mains
power supply and then reconnected, the charging
process will start from the beginning again.
It is normal and completely safe for the charger and
the vacuum cleaner to heat up.
Vacuuming
2
4
Fig.
Actuate the sliding switch in the direction of the
arrow.
Crevice nozzle
For vacuuming crevices and corners, etc.
3
8
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
After using the appliance
4
10
Fig.
Switch off the appliance after vacuuming.
Emptying the dust container
In order to achieve the best possible vacuuming
results, the dust container should be emptied after
every use.
5
11
Fig.
Using the release button, unlock the dust container
and remove it from the motor unit.
6
12
Fig.
Use the handle to remove the motor protection filter
and foam filter from the dust container.
Empty the dust container.
Cleaning the filter
7
13
Fig.
Unlock the dust container. Remove the motor
protection filter and foam filter from the dust
5
container (see fig. 11 and 12)
Clean the motor protection filter and foam filter by
tapping out the dirt.
If there are heavy deposits of dirt, the filter and dust
container can be washed out.
Then wipe out the dust container with a dry cloth;
allow the filter to dry completely before re-inserting
it.
8
14
Fig.
a) Insert the motor protection filter and foam filter into
the dust container.
a) Fit the dust container onto the motor unit and lock it
into place.
New filters can be obtained from our after-sales
service, if required.
Care
Before cleaning the cordless vacuum cleaner, it must
be switched off and disconnected from the charger.
It can be cleaned with a standard commercially-
available plastic cleaner.
!
Do not use a scourer, glass-cleaning agent or
all-purpose cleaning product. Never immerse
the vacuum cleaner in water
6
35

Werbung

loading