Technical Data - Nordica CLEO COMBI Holz Bedienungsanleitung

CLEO COMBI
Definition:
Combi stove according to EN 13240 / DIN 18842
1.

TECHNICAL DATA

Construction system
Nominal power in kW
Yield as %
Flue exhaust pipe diameter in mm
Flue exhaust pipe diameter in mm
Tank capacity in kg
Hourly consumption in kg / h
Depression at nominal calorific yield in mm H
CO measured at 13% oxygen as %
Emission of exhaust gases in g/s- wood
Gas temperature at exhaust in ° C - wood
Hearth aperture dimensions in mm (L x H)
Hearth body/hearth surface dimensions in mm (L x H x P)
Grate type
Height in mm
Width in mm
Depth (without handles) in mm
Weight in Kg
Fire-prevention safety distances
* Tests performed using wooden pellets as fuel with calorific value of 4.9 kW/h/kg and
diameter of 6 mm.
For buildings whose heat insulation does not correspond with the provisions regarding heat protection, the heating
volume of the product is the following:
(30 Kcal/h x m
(40 Kcal/h x m
(50 Kcal/h x m
With heat insulation suitable for the provisions regarding protection
temporary heating, in the case of power cuts exceeding 8h, the heating
8192000 Rev.04 – EN
3
) - favourable type of construction:
3
) - less favourable type of construction:
3
) - unfavourable type of construction:
CLEO COMBI
O
2
of heat, the heating volume
capacity decreases by about 25%.
* CLEO COMBI
Wood Pellet
1
6.4 6
79.2 81
150 150
150 150
/ 20
1.8 min.1 – max 2
1.2 1.2
0.11 0.05
4.9 7.0
225 241
340 x 210
345 x 270 x 175
Cast iron grate
Chapter 20
Chapter 20
Chapter 20
Chapter 20
Chapter 4
WOOD PELLET
183 m³ 172 m³
138 m³ 129 m³
110 m³ 103 m³
is greater. With
21