Indicator Light; Installing A Microsd Card; Restore Factory Settings - imilab C30 Bedienungsanleitung

• Indicator Light

Steadyblue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in

• Installing a MicroSD Card

Makesure that the power to IMILAB C30isalready disconnected.Adjust the camera lens
upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the
side wth contact points must be facing down).
Note: Please turn Off the 'MILAB C30's power supply before inserting or rerrnving
MicroSD card. Please use a genuine Micro SDcard
with a reading/writing speed of no lessthan Ul [Class10.(Maximum support capacity
is 64 GB)

• Restore Factory Settings

Pressand hold the Resetbutton more than Ss,then you can hear the
voice.
Data stored on tie MicroSD card is not deleted.
the
by a qualified supplier,
"reset succeed"