imilab C30 Bedienungsanleitung Seite 4

Installation
IMILAB C30 can be placed on a number of horizontal surfaces, such as a writing desk,
dining table, and coffee table. tt can also be mounted on the wall.
Mounted 'MILAB C30 on a wall:
1. Drilltwo holes on the wall by using the base of the IMILAB C30as a template. It is
recornrnended that you mark the locations Of the hole With a before drilling.
The diameter of each hole is approximately 6 mm, and the depth is approximately
30 mm.
2. Insert the two plastic anchors into the holes on the wall.