Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1-6-6. Cam Lever Replacement
1, Remove the top bracket. (Refer to item "1-6-1. Top
Bracket Replacement".)
to
Remove the cassette holder assembly. (Refer to item
"1-6-2. Cassette Holder Assembly Replacement'.)
3. Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement".)
4. Remove the loading drive assembly. (Refer to item "1-
6-29. Loading Drive Assembly Replacement".)
5. Remove the drive lever. (Refer to item "1-6-40, Drive
Lever Replacement".)
6. Remove the pinch roller assembly. (Refer to item "1-
6-21. Pinch Roller Assembly Replacement".)
7. Remove the cam gear. (Refer to item "1-6-31. Cam
Gear Replacement".)
8. Move the cam lever (1) until it stops in the direction
shown by the arrow (A). Pull out the cam lever (1)
lifting up straightly at the position where the cam lever
(1) stops.
9. Apply grease to the portions of bosses (A) to (C) ona
new cam lever,
Note:
* Confirm that the boss (A) on the cam lever (1) is
inserted into the hole on the F/L drive slider (2).
¢ After inserting the cam lever (1), confirm that the cam
lever (1) moves smoothly.
10. Replace the cam lever in the reverse order of removal.
Cam lever (1) se
Boss (A)
(Apply grease.)
F/L drive
a
(2)
Fig. 6-6-1
1-6-7. F/L Drive Slider Replacement
1. Remave the top bracket. (Refer to item "1-6-1. Top
Bracket Replacement".)
rm
. Remove the cassette holder assembly. (Refer to item
"1-6-2. Cassette Holder Assembly Replacement'".}
3. Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement".)
4. Remove the loading drive assembly. (Refer to item "1-
6-29. Loading Drive Assembly Replacement".)
5. Remove the drive lever. (Refer to item "1-6-40. Drive
Lever Replacement".)
6. Remove the pinch roller assembly. (Refer to item "t-
6-21. Pinch Roller Assembly Replacement".)
7. Remove the cam gear. (Refer to item "1-6-31. Cam
Gear Replacement".)
8. Remove the cam lever. (Refer to item "1-6-6. Cam
Lever Replacement".)
9. Remove the drive lever gear. (Refer to item "1-6-4.
Drive Lever Gear Replacement".)
10. Push the F/L drive slider (1) in the direction shown by
the arrow (A) and slide it. Furthermore, pull out it to
the front side lifting it in the direction shown by the
arrow (B).
11. Apply grease to the shaded parts (a) to (d) on a new F/
L drive slider (1).
Note:
For the phase alignment of the drive lever gear, refer to
item "1-6-4. Drive Lever Gear Replacement".
12. Replace the F/L drive slider (1) in the reverse order of
removal.
Note:
After completion of the replacement, confirm that the F/L
drive slider (1) moves smoothly.
F/L drive slider (1)
Fig. 6-7-1
1-6-8. Arm Brake Lever Assembly and
Arm Brake Torsion Spring Replacement
1. Make the cassette holder assembly to the slot-out
(EJECT) position.
. Turn the arm brake lever assembly (1) in the direction
shown by the arrow (A) until it stops. Pull out the arm
brake lever assembly (1) to the front at the position it
stops.
tv
Note:
Take care that the arm brake torsion spring (2) is removed
forcefully.
Groove on the
Arm brake
mechanical deck
assembly (1)
Fig. 6-8-1
3. Hook the arm brake torsion spring (2) temporarily to a
new arm brake lever assembly (1).
Note:
Take care of the direction of the arm brake torsion spring
(2) so that the longer end of the arm brake torsion spring
(2) is hooked on the temporary hook.
Temporary hook
Arm brake torsion
spring (2)
Arm brake lever
assembly (1)
Fig. 6-8-2
. Insert the hook portion on the arm brake lever
assembly (1) to the cutout on the mechanical deck.
. Turn the arm brake lever assembly (1) counterclock-
wise and fix it at the position which the arm brake
lever assembiv (1) faces to the straight below.
. When pushing the tip of the arm brake torsion spring
(2) located at {B) position, the tip is removed from the
temporary hook and moves to the hook on the
mechanical deck.
. The arm brake lever assembly tums to the specified
position by force Of the arm brake torsion spring.
Groove on the mechanical deck assembly
Arm brake
J,
torsion spring (2)
Asm brake lever
assembly (1)
Fig. 6-8-3
Werbung
