KERN EOC 6K-3 Betriebsanleitung Seite 71

2.2.1 Numerical input via the navigation buttons

Press , the current setting will be displayed. The first digit will be flashing
and is ready for changing.

If you do not wish to change the first digit, press
flashing.
Each time you press
the last digit the display will return to the first digit.

To change the selected (flashing) digit, press
value is displayed. Then press
.

Complete your entry by
EOC-BA-e-1920
, the display will move to the subsequent digit, after
to access further digits and change them by
.
, the second digit will start
repeatedly until the desired
17