Yard Force Compact 300RBS Sicherheitshinweise Seite 6

GB
• Never lift the Robotic Mower or carry it around with the
mains switch is in the ON position.
• Do not let persons use the mower who do not know how
it works or behaves.
• Do not put anything on top of the Robotic Mower or its
docking station.
• Do not use the Robotic Mower with defective blade
discs, body, defective blades, screws, nuts etc.
• Avoid operating the machine in wet grass. Doing so can
cause additional wear and tear, and will increase the
amount of cleaning required.
WORK INTERRUPTIONS
• After the machine has been turned off, the cutting
cylinder will continue to rotate for a few seconds. Keep
hands and feet well away.
• Switch off the device. Only remove blockages when the
machine is standing completely still.
• Switch off the power when the machine is transported,
lifted or tilted.
• Never leave the machine unattended. Children should
be supervised to ensure that they do not play with the
appliance.
CAUTION!
The following below outlines measures to avoid damage and
harm to both the Robotic Mower and people using it.
TAKING CARE OF YOUR MACHINE
• Switch off the power when the machine is to be carried
across uneven surfaces, for example steps.
8
• Inspect the machine before each use. Never operate
the machine if safety devices (e.g. impact protector,
parts of the cutting facility or bolts) are missing, worn
out or damaged. Check the power cable for damage. To
avoid imbalance, all tools and bolts must be changed as
complete sets.
• Only use spare parts and accessories that have been
supplied or recommended by the manufacturer. The
use of alien parts results in the immediate loss of all
guarantee claims.
• Ensure that all nuts, bolts and screws are firmly tightened
and that the machine is in a safe working condition.
• Never try to repair the machine yourself, unless you have
been trained accordingly. All work that has not been
listed in these instructions must only be carried out by
authorised servicing agencies.
• Treat the machine with the greatest care. Always keep
the tool clean. Follow the maintenance instructions.
• Never overload the machine. Always work within
the specified capacity range. Do not use low-power
machines for heavy-duty work. Do not operate the
machine for purposes for which it is not intended.
ELECTRICAL SAFETY
CAUTION!
The following states how to avoid accidents and injuries due
to electric shock:
• Before each use, carry out a visual inspection of the
power and length and type of extension cords to be used
(not lighter than required by Clause 25.7) for any signs
of damage or ageing. Damaged mains power cables
increase the risk of electric shock.
9
GB