Cleaning - witeg LABmax airless Gebrauchsanleitung

max
LAB
Glass plunger (17)

4.2 Cleaning

1. Follow the safety instructions!
2. Push the plunger downwards until it stops and then turn the valve axle (12)
to the draining position.
3. Let the remaining reagent in the ejection tube (6) flow back into the reagent
bottle.
4. Place the device with the bottle in a suitable sink.
5. Unscrew the device from the bottle and slightly tap the inside of the bottle with
the suction tube (20) in order to drain it.
Disassemble the "Labmax airless" until you can securely clean it from all reagent
build up.
The cleaning can be performed with distilled water and alcohol.
22
airless
PTFE-seal ring (16)
Reflux tube (21)
suction tube (20)
Seal nut (15)
Valve head (19)
PTFE cylinder (18)