Pbx / Supplementary Services; Dialling Pause - AUDIOLINE Oyster 50X Bedienungsanleitung

PBX / Supplementary Services

6 PBX / Supplementary Services
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring
calls and automatic call back can be used via the R button. Please refer to the operating
manual supplied with your private branch exchange to determine which Flash time must
be set in order to use these functions. The dealer where you purchased the exchange can
provide information as to whether the telephone will work properly with the exchange.
Setting the Flash time, . Page 43.

Dialling pause

In the case of private branch exchanges, it is necessary to dial a number to get an outside
line with its corresponding dialling tone. When using some older private branch ex-
changes, it takes a little time before the dialling tone becomes audible. Particularly in the
case of such private branch exchanges, it is advantageous to insert a dialling pause after
the number for the outside line so that the number can be dialled in a continuous process
without having to wait for the dialling tone. Setting the dialling pause, . Page 43.
P
After dialling the number for the outside line, the telephone then waits a specific time be-
fore dialling the actual phone number.
R−button and supplementary services
Your telephone supports the supplementary services offered by your telephone network
provider, such as brokering, call waiting and conference calls. The supplementary ser-
vices can be used in conjunction with the R button. Please contact your telephone net-
work provider regarding which Flash time must be set to use the supplementary services.
Please contact the telephone network provider with regard to enabling the supplementary
services. Setting the Flash time, . Page 43.
Caller ID (CLIP
If this function is available with your telephone line, the number of the caller appears in the
display when the phone rings. If the caller has suppressed transmission of his phone
number, a corresponding message appears in the display. The phone number is not dis-
played and, as a result, is not stored in the call log.
1
CLIP: Calling Line Identification Presentation
40
The pause can also be entered with the phone numbers in the phone book.
1
)
The caller ID display function is a supplementary service offered by telephone
network providers. Contact your network provider for further information.
Insert the dialling pause