Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en Troubleshooting
Fault
Display shows "Re-
start appliance".
Display shows
calc'nClean very fre-
quently.
66
Cause and troubleshooting
Appliance has a fault.
Set the mains switch to
1.
Set the mains switch to .
2.
Decalcified water still contains small amounts of lime.
Insert a new water filter.
1.
Set the corresponding water hardness.
2.
Incorrect or too little descaling agent used.
When descaling, only use suitable tablets.
▶
Service programme has not been carried out in its en-
tirety.
Start the "Special rinsing" service programme.
▶
→ "Service programmes", Page 60
and wait 60 seconds.
Werbung
