EuroLite LED-TMH-16 Bedienungsanleitung Seite 27

Function
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select "Address" by pressing Up or Down.
• Press the Enter-button, adjust the DMX address by pressing Up or Down.
• Press the Enter-button to confirm.
DMX indicator
With this function, you can display with which value the respective channel is sent.
Slave
With this function, you can define the device as slave.
Auto
With this function, you can run the internal program. The selection "Alone" means Stand Alone-mode and
"Master" that the device is defined as master.
Music
With this function, you can run the internal program sound-controlled. The selection "Alone" means Stand
Alone-mode and "Master" that the device is defined as master.
Info
Temperature
Near lamp Temp
With this function you can display the temperature in the projector-head in degree Celsius/degree
Fahrenheit.
Software version
With this function you can display the software version.
Person
Status
PAN Reverse
With this function you can reverse the PAN-movement.
TILT Reverse
With this function you can reverse the TILT-movement.
PAN degree
With this function you can select the PAN-degree.
• Select "P-Degree" by pressing Up or Down.
• Press the Enter-button, the display shows "540".
• Press Up or Down to select the desired degree between "540" and "360".
• Press the Enter-button to confirm.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of two different speeds.
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
• Select "Mic Sens" by pressing Up or Down.
• Press the Enter-button.
• Press Up or Down to select the desired sensitivity.
• Press the Enter-button to confirm.
27/32 00101665, Version 1.0