Privacy Zone; Other Set - Eneo VKCD-1329/IR Installation Und Betriebsanleitung

• SENSITIVITY: 1~7
Set the sensitivity of the motion detection
• RESOLUTION: 1~5
If setting it to high, the camera can detect even a trivial movement of the target.
• ALARM OUT: Not Available

9.2.3 Privacy Zone

You can configure the privacy related settings.
The PRIVACY function will protect your privacy by screening the privacy area that you have specified during
monitoring. You can change the style to adjust the mosaic size and colour of the PRIVACY ZONE.
Use the four direction keys to select one from PRIVACY  through 8. Select one from PRIVACY ~8 and press the SET-
UP key to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.
NOTE: If more than one PRIVACY ZONE is specified and the PRIVACY SET is set to ON, the PIP function will be
deactivated.
How to set the point: You can set each position of the 4 point.
1. I f you press the SETUP key in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you
press the SETUP key, the points available will move.
2. U se the four direction keys to set the position of each point. Set each position of the four points and press the
SETUP key to complete the positioning.
How to set the position: You can move the position of the overall area.
1. B y pressing the SETUP key in <POSITION>, you can move the overall position of the privacy zone.
2. U se the four direction keys to move the position and press the SETUP key to confirm it.

9.2.4 Other Set

You can configure for Factory Defaults, and more.
• FACTORY DEFAULTS
All the settings will be restored to the factory default.
• OSD COLOR
You can set the OSD colour to BW, RED, GREEN or BLUE.
3