Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MOISTURE CONTENT METER
USER'S MANUAL
CONTROL USING REFERENCE RESISTORS
There are two reference resistors available as an op on. Normally no
adjustment is necessary. If the values deviates from the tolerance the
instruments needs to be sent for repair.
INSTRUCTION:
•
Set the meter to +20º C.
•
Set the woodgroup to No. 3.
•
Insert the appropriate resistor in the instrument.
•
Compare the reading with the value and tolerance in the table
below.
•
The value should not deviate more than the defi ned tolerance.
Reference
Measurement
resistor
value (MC %)
BLUE
18,5
RED
8,5
Menu
The unit is equipped with 4 push bu ons. For the naviga on inside the
menu the func ons of the bu ons are as follow:
ENTER
ESCAPE
To leave a menu simply press the ESCAPE key. To enter the menu press
ESCAPE, UP and DOWN bu on once together. The following screen
appears:
To show the value screen only press ENTER. To select Parameter press
DOWN key un l the arrow is indicated in front of Parameter then press
ENTER key.
Parameter
Language selec on:
If the arrow is in front of Language and the ENTER key will be pressed,
each me the language will be changed to the indicated one (here engl.).
Temperature unit selec on:
Press DOWN key to select Temp.unit:
Press ENTER key to select °F if °C is indicated or °C if °F is indicated.
ENG
MC-460
Tolerance MC (%)
+/- 0,5
+/- 0,5
UP
DOWN
- 6 -
Illuminance:
Press DOWN key to select Light:
Press ENTER key to edit the illuminance factor.
To change the intensity of the illumina on press UP or DOWN key. The
intensi y will appear a er confi rma on with the ENTER key. Or press
ESCAPE key if no changing is decided.
Serial No:
Can not be changed by users.
Technical data's
Measuring range:
3 - 120% Moisture Content
Material:
Wood, wood chips, sawdust, paper and more.
Accuracy:
+/- 0,5%
Opera ng
- 10°C / + 60°C
temperature:
Dimensions:
134 x 72 x 25mm (L x W x H)
Housing material:
ABS
Weight:
ca. 158 g (with ba ery)
Indispensable for
- Workmen in sawmills or building trade
- Manufacturer of furniture's
- Joiners, Architects, Carpenters, Parquetry,
Glaziers
ENVIRONMENT PROTECTION
According to the regula ons for ba ery dispose, all ba eries must be
returned to the trade or to ba ery collec ng points. You are not allowed to
dispose ba eries through the household waste.
ONLY FOR EU COUNTRIES
Do not dispose of electrical tools together
with household waste material!
In observance of European Direc ve 2002/96/ EC on waste
electrical and electronic equipment and its implementa on
in accordance with na onal law, electric tools that have reach
the end of their life must be collected separately and
returned to an environmentally recycling facility.
Werbung
Inhaltsverzeichnis
