Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The MAX! Eco Switch communicates with the MAX!
Components only centrally via the MAX! Cube. If this
central interface fails, MAX! Components can no long-
er receive commands from the MAX! Eco Switch.
The MAX! Eco Switch can be reset to the initial state
manually. Restoring the initial state deletes all settings and
information about taught-in devices.
Fi r s t r e m ove th e b a t te r i e s f r o m th e b a t te r y
•
compartment.
Wait 60 seconds.
•
Press and hold down the button at the top or bottom.
•
•
Re-insert the batteries at the same time.
•
Press and hold down the button until the device LED
starts to flash.
Release the button. The factory settings are restored.
•
9. LED flashing sequences and
The LED's flashing sequences have different meanings:
Flashing sequence Meaning
1x flash
2x flashes
3x flashes
18
8. Teach-out/Reset
transmission behaviour
Confirmation following successful sending
of the radio command
Duty cycle has been exceeded. The
longest period to wait before sending again
would be an hour.
Error message, radio command not sent
successfully
Werbung
