eQ-3 MAX! Eco Bedienungsanleitung Seite 13

1. Intended use
The MAX! Eco Switch has a special job to do in the MAX!
System. When you leave your house or apartment, all
rooms can be switched to manual mode and reduction
temperature at the touch of a button. Similarly, when
you return home, all MAX! Components can be set to
automatic operation at the touch of a button, thereby
starting the separate weekly heating programs configured
for each room. Communication between MAX! Compo-
nents is bi-directional. This ensures that the information
sent reaches the recipient.
The MAX! Eco Switch is battery-operated. As such it is
highly flexible where mounting and selecting a mounting
location are concerned. The MAX! Eco Switch is mounted
and removed very easily using screws or adhesive strips.
It is compatible with a number of different surfaces includ-
ing furniture, brick walls, tiles or glass. Holes or slits do
not have to be chiselled out of brick walls. The frame sup-
plied with the device can be used for wall mounting. It is
also possible to integrate the MAX! Eco Switch into exist-
ing switches, even if a flush-mounting box is not already
present. (See Section 10 for more detailed information.)
The device may only be operated indoors and must be
protected from the effects of damp and dust, as well as
solar or heat radiation.
Using this device for any purpose other than that
described in this operating manual does not fall with-
in the scope of intended use and shall invalidate any
warranty or liability. This also applies to any conversion
or modification work.
13