Herunterladen Diese Seite drucken

Sanyo 14MT2 Bedienungsanleitung Seite 14

Vorschau ausblenden Andere Handbücher für 14MT2:

Werbung

14
General Operation
@ Auto Shut Off
This TV set will automatically switch into
the standby mode, 10 minutes after a sig-
nal is no longer received. The time until the
set will switch off is displayed on the
screen.
@ Programme Selection
@ Up/Down Programme Selection
Press the PA button to increase the pro-
gramme position.
Press the PV button to decrease the pro-
gramme position.
m@ Direct Programme Selection
For selection of programme position 0 to 9,
press the corresponding numeric button. If
the required programme is equal or more
than 10, for example 23, first press the
Digit button and enter 2 then 3.
CD >
Allgemeine Bedienung
@ Automatisches Ausschalten
Dieses Fernsehgerat verfugt uber eine
automatische Ausschaltfunktion. Ist das
Fernsehgerat noch nach Sendeschluf3
eingeschaltet, schaltet das Gerat, wenn es
nach 10 Minuten kein Signal empfangen
hat, auf Bereitschafisbetrieb.
@ Programmwahl!
@ Auf/Ab Programmwahl
Drucken Sie die PA Taste, um auf das nach-
ste Programm zu schalten.
Driicken Sie die PW Taste, um auf das
vorherige Programm zu schalten.
@ Direkte Programmwahi
Um die Programme 0 - 9 einzuschalten,
drucken Sie die entsprechende
Nummerntaste. Wenn das gewunschte
Programm 10 oder hdher ist, Zum Beispiel
23, drucken Sie zuerst die Taste zur
Nummerneingabe und geben sie dann 2
und 3 ein.

Werbung

loading