norbar HANDTORQUE HT 1 Bedienungsanleitung Seite 12

NOTE: Some torque wrenches will not be active ('click' or 'break') when used in the counter-
clockwise direction.
Operating the Multiplier
1. Fit the multiplier with the correct size of power drive or impact quality socket to suit the bolt to be tightened.
2. Fit the multiplier to the bolt with the reaction plate adjacent to the reaction point. See Figure 2.
3. Fit the torque wrench to the multiplier, set as in 'Setting Torque for Bolt Tightening'.
4. Operate the torque wrench in the normal manner until it 'clicks' or 'breaks'. Smooth and even use of the
torque wrench will give more accurate results.
TIP: For extra accuracy a torque transducer can be used to measure the input or output torque.
10