Thomashilfen EASyS Advantage Montageanleitung Seite 5

5-point-belt Item code: 8480
Pull the two upper straps (with the large pads) through the openings in the pad-
ding and insert them through the slots in the front back plate. (Fig. 2)
To make installation easier, pull out the back plate slightly. To do this, loosen the
two thumbscrews at the back of the backrest.
Then pull the straps into the folding buckles and adjust to the preferred strap
length (Fig. 3).
Tip: The strap length of the upper straps can also be adjusted at the front by
pulling the D-ring to shorten the strap. (Fig. 4)
The two side strap ends (with the smaller pads) can be attached to the back pla-
te at the rear or to the side of the plastic element with folding buckles (Fig. 5-6).
Pull the straps to the right and left of the back upholstery to the corresponding
folding buckle and fasten them.
To fit the crotch strap, the upholstery must be opened in the stitched seams.
(Fig. 7) The lower belt is passed through the seat cushion (Fig. 8). The thumb-
screw is inserted through the eyelet (Fig. 9) and screwed in front of the seat
plate. (Fig. 10)
5