Seite 1
Mainboard Short Description Mainboard D2981...
Seite 2
For automatic driver updates, go to: "http://ts.fujitsu.com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
Seite 4
Use of these by the third parties may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-D2981-Z320-1-7419, edition 1...
Seite 5
1) Both connector positions possible 4 = Data negative B 9 = Key 2) 2pin or 3pin connector possible Data positive A 10 = Not connected Recovery inserted = The system starts from floppy and allows a BIOS recovery A26361-D2981-Z340-1-7619 Fujitsu Technology Solutions...
Seite 6
FAN controlled PSU** / CPU (FAN1) / AUX (FAN2) / AUX2 (FAN3) Temp monitored CPU/SYS1/SYS2/SYS3 SmartCard SystemLock (USB / serial) Fujitsu Technology Solutions Keyboard Power Button Support List of special onboard Features D2981 Silent Fan / Silent Fan LT / System Guard...
Seite 7
Mainboard D2981 First-time setup Deutsch English...
Seite 9
BIOS-Update mit einem USB-Stick ............Fujitsu Technology Solutions...
Seite 11
Die Position der externen Anschlüsse Ihres Mainboards finden Sie am Anfang des Handbuches. PS/2-Tastaturanschluss, violett PS/2-Mausanschluss, grün LAN-Anschluss (RJ-45) Mikrofonanschluss, rosa Audioeingang (Line in), hellblau USB – Universal Serial Bus, schwarz Audioausgang (Line out), hellgrün DVI - I (VGA über Adapter) Serielle Schnittstelle, türkis DisplayPort Fujitsu Technology Solutions...
Seite 12
Sockel AMD AM3 938 • Sempron, max. 95 W • Athlon II, max. 95 W • Phenom II, max. 95W Single, Dual, Triple, Quad, Six Eine aktuelle Liste der von diesem Mainboard unterstützten Prozessoren finden Sie im Internet unter: "http://ts.fujitsu.com/mainboards". Fujitsu Technology Solutions...
Seite 13
► Je nach Ausbau-Variante müssen Sie eine Schutzfolie vom Kühlkörper abziehen oder den Kühlkörper mit Wärmeleitpaste bestreichen, bevor Sie ihn aufsetzen. ► Je nach Prozessor-Variante werden für die Befestigung des Kühlkörpers noch Klammern mitgeliefert, die den Kühlkörper fixieren. Fujitsu Technology Solutions...
Seite 14
Modulgröße 1, 2 oder 4 GByte pro Modul Eine aktuelle Liste der für dieses Mainboard empfohlenen Speichermodule finden Sie im Internet unter: "http://ts.fujitsu.com/mainboards". Es muss mindestens ein Speichermodul eingebaut sein. Speichermodule mit unterschiedlicher Speicherkapazität können kombiniert werden. Es dürfen nur ungepufferte 1,5 V-Speichermodule ohne ECC verwendet werden.
Seite 15
Die Zuordnung der PCI-Interrupts zu den IRQ Lines finden Sie in der folgenden Tabelle: On board controller 1 (A) 2 (B) 3 (C) 4 (D) 5 (E) 6 (F) 7 (G) 8 (H) PCI INT LINE USB 1.0 USB 2.0 SATA / AHCI SMBus HD Audio OnBoard graphic Fujitsu Technology Solutions...
Seite 16
Komponenten an dieser PCI IRQ Line müssen IRQ Sharing unterstützen. BIOS Update Wann sollte ein BIOS-Update durchgeführt werden? Fujitsu Technology Solutions stellt neue BIOS-Versionen zur Verfügung, um die Kompatibilität zu neuen Betriebssystemen, zu neuer Software oder zu neuer Hardware zu gewährleisten. Außerdem können neue BIOS-Funktionen integriert werden.
Seite 17
Die für das BIOS-Update notwendigen Daten werden auf den USB-Stick geschrieben. ► Starten Sie den PC neu und drücken Sie um in das Boot Menü zu gelangen. ► Wählen Sie den USB-Stick als Boot Device. ► Folgen Sie den Bildschirmanweisungen. Fujitsu Technology Solutions...
Seite 18
10 - Deutsch BIOS Update Fujitsu Technology Solutions...
Seite 19
Mainboard D2981 First-time setup Deutsch English...
Seite 21
BIOS update using a USB stick ............Fujitsu Technology Solutions...
Seite 23
PS/2 mouse port, green LAN port (RJ-45) Microphone jack (mono), pink Audio input (Line in), light blue USB – Universal Serial Bus, black Audio output (Line out), light green DVI - I (VGA via adapter) Serial interface, turquoise DisplayPort Fujitsu Technology Solutions...
Seite 24
Sempron, max. 95 W • Athlon II, max. 95 W • Phenom II, max. 95W Single, Dual, Triple, Quad, Six A current list of the processors supported by this mainboard is available on the Internet at: "http://ts.fujitsu.com/mainboards". Fujitsu Technology Solutions...
Seite 25
► Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it. ► Depending on the processor variant, clips may also be supplied for mounting the heat sink that fix it in place. Fujitsu Technology Solutions...
Seite 26
1, 2 or 4 GByte for one module A current list of the memory modules recommended for this mainboard is available on the Internet at: "http://ts.fujitsu.com/mainboards". At least one memory module must be installed. Memory modules with different memory capacities can be combined.
Seite 27
The assignment of the PCI interrupts to the IRQ Lines is shown in the following table: Onboard controller PCI INT LINE 1 (A) 2 (B) 3 (C) 4 (D) 5 (E) 6 (F) 7 (G) 8 (H) USB 1.0 USB 2.0 SATA / AHCI SMBus HD Audio OnBoard graphic Fujitsu Technology Solutions...
Seite 28
BIOS Update When should a BIOS update be performed? Fujitsu Technology Solutions makes new BIOS versions available to ensure compatibility with new operating systems, new software or new hardware. In addition, new BIOS functions can be integrated. A BIOS update should also always be performed if there is a problem that cannot be solved using new drivers or new software.
Seite 29
The data required for the BIOS update will be written to the USB stick. ► Restart the PC and press to call up the Boot menu. ► Select the USB stick as the boot device. ► Follow the on-screen instructions. Fujitsu Technology Solutions...