GreenWorks G24LT28 Bedienungshandbuch Seite 6

EN
1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 19.
Trigger
1
Lock-out button
2
Rear handle
3
Auxiliary handle
4
Upper shaft
5
Lower shaft
6
Motor housing
7
Edge guide
8
Cutting line
9
Trimmer head
10
Guard
11
Lock button
12
Knob
13
Bolt
14
Battery release button
15
Cut-off blade
16
Tab
17
Spool cover
18
Spool
19
Spool housing
20
Eyelet
21
Anchor hole
22
Guide slot
23
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
1.3 PACKING LIST
1 String trimmer bare
tool
2 Auxiliary handle
assembly
English
3 Guard assembly
4 Operator manual
2 GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
3 INSTALLATION
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
3.2 ATTACH THE EDGE GUIDE
Figure 2.
The edge guide can limit the cutting range of the machine
and decrease the risk of the damage caused by the rotating
cutting line.
1. Push the edge guide onto the trimmer head until it
engages in the slots.
2. The edge guide can be flipped up for storage.
4
NOTE