Sony XR-50X94S Installationsinformationen Seite 14

FW-32BZ30J only
• Remove one side of the Table-Top Stand
at a time.
• Repeat the previous step and remove the
other side of the Table-Top Stand.
Note
 Make sure to place TV or LCD Monitor on the place
where you put a soft cloth on to prevent damaging
display's surface.
 Be sure to store the removed Table-top Stand in a
safe place, keeping them away from children. You
will need them if you want to use the TV or LCD
Monitor on a table in the future. The Table-Top
Stand cannot be purchased separately.
WARNING
 Be sure the TV or LCD Monitor is on the vertical
position before switching on. TV or LCD Monitor set
must not powered on with LCD panel face down to
avoid uneven picture uniformity.
 If pressure or shock is applied to the surface of the
TV or LCD Monitor, the TV or LCD Monitor may
break or become damaged.
 Lay the TV or LCD Monitor face down on a stable
and level surface with the Table-Top Stand hanging
over the edge of the surface. Having the TV or LCD
Monitor face and the base of the Table-Top Stand
on the same level surface will create an unstable
working condition and can damage the TV or LCD
Monitor.
 When detaching the Table-Top Stand from the TV
or LCD Monitor, hold the Table-Top Stand securely.
2
Remove the screws from the rear
of the TV or LCD Monitor.
3
Except FW-32BZ30J
Attach the Wall-Mount
Attachment
the TV or LCD Monitor) to the
rear of the TV or LCD Monitor (to
make it parallel with the wall).
VS
Note
 Be sure to fasten the Wall-Mount Attachment
VS
when attaching them to the TV or LCD
Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment
might result in over torqueing the Wall-Mount
Attachment
Monitor.
4
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring
to "Supplied with SU-WL450" in
"Checking the Parts" on page
7.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
− 14 (GB) −
(supplied with
VS
1.5 N·m
{15 kgf·cm}
VS
. Use of another tool
VS
and damaging the TV or LCD