Philips 7000 Serie Bedienungsanleitung Seite 5

Before first use
Installing the wall mount
110 ± 2 cm
17 Mini TurboBrush (XC7055, XC7057 only)
18 Combination tool
19 Soft brush (XC7057 only)
20 Upholstery tool (XC7055, XC7057 only)
21 Crevice tool
1 Invert the wall mount and unlatch the gray lever. Insert the charging port,
ensuring the metal part is visible and pointing upright on the front side of the
wall mount.
2 Neatly arrange the cable by tucking it into the designated groove.
3 Close the gray lever. Make sure the gray lever is locked in place with a "CLICK"
sound.
4 Securely affix the wall mount to your preferred position on the wall, ensuring
that the mounting screw holes are approximately 110 cm from the floor.
Caution: Be careful when you drill holes in the wall to fasten
the wall mount, to avoid the risk of electric shock.
English
7