Philips 7000 Serie Bedienungsanleitung Seite 30

English
32
Problem
The appliance has a lower
suction power than usual.
Dust escapes from the
appliance.
The appliance does not
move smoothly across the
floor when cleaning a carpet.
The brush does not turn
anymore.
Possible cause
(code: E2, E3) The appliance is
not working at a suitable
temperature.
(code: i4, i5) The brush roll is
stuck or objects are stuck in the
air flow channel.
(code: E9) The motorized
nozzle is overheated.
The filter and the cyclone are
dirty.
The dust container is not
attached properly to the
appliance.
The filter is dirty.
The filter is not present in the
appliance.
Something is blocking the
cyclone.
The dust container is not
properly attached to the
appliance.
The appliance is rotated or
flipped when the power is off.
The floor type recognition
function is not on.
The selected suction power has
been too high.
The brush is clogged with hair
or dirt.
Solution
Make sure the appliance is used at a
temperature of 5-40 °C.
Make sure the appliance is switched off.
Clean the nozzle according to the user
manual and check the tube by removing
the tube from the main appliance. Remove
the object in the nozzle or tube and restart
the appliance.
Switch off the appliance and wait 15
minutes. Touch the upper housing of the
nozzle to feel if it is still warm. If the nozzle
is still warm, wait longer for the nozzle to
cool down. Once the nozzle has cooled
down, try switching the appliance back on.
Empty the dust bucket. Clean the filter and
the cyclone. Make sure the filter is washed
at least once a month, when using the
appliance regularly. Make sure hair and dirt
stuck in the cyclone are removed.
Make sure the dust container is attached
properly.
Clean the filter. See also the user manual.
Make sure that the filter is in the appliance
and assembled correctly.
Check the cyclone for stuck objects and
remove any object blocking the cyclone.
Also ensure all hair and dirt stuck in the
cyclone are removed.
Empty the dust container and attach the
dust container correctly to the appliance.
Keep the appliance upright when the
power is off.
Switch on the floor type recognition
function in the digital menu.
Decrease the suction power. See also the
user manual.
Clean the brush by hand or with a pair of
scissors.