Philips 7000 Serie Bedienungsanleitung Seite 29

Signal
i8
i10
Troubleshooting
Dry cleaning
Problem
The appliance does not
respond when the on/off
button is pushed.
The charging station is not
stable on the wall.
The appliance suddenly
stops working.
Meaning of signal
The filter is polluted.
Clean the filter. Follow the instructions on the screen or in the users manual.
You can buy new filters in the online Philips shop at
www.philips.com/support or at your Philips dealer.
The battery is not properly inserted.
Remove the battery, and then put the battery back. If this does not work,
please take the appliance to a Philips service center or contact the Consumer
Care Center.
The battery level is low and needs to be charged. Charge the appliance or the
battery via the suggested charging method.
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Possible cause
The display shows the battery
empty icon.
The screws holding the
charging station are loose.
The screws are not the right
size.
The charging station is not
attached to a stable wall.
When the appliance has an
internal malfunction, the
buttons will not respond and
the screen will remain blank.
Solution
To charge the battery, connect the
appliance to the charging station or attach
the handheld vacuum cleaner directly to
the power plug of the adapter.
Tighten the screws.
Mount the charging station with the
supplied screws.
Check that the wall on which the charging
station will be mounted is stable.
Connect the appliance to the charging
station or attach the handheld vacuum
cleaner directly to the adapter. Check the
display. If an error code appears, you can
find its meaning in the user manual.
English
31