Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction and Spare Parts List
This is your copy of the instructions and spare parts list for the drilling machine. It has
been prepared for those using the machine or who are responsible for its maintenance
and service and should therefore be made readily available for all those concerned.
Read through the manual carefully before installing it and starting it up.
The machine is of simple design and robustly built, but we cannot guarantee perfect
function if it is not correctly handled.
It is therefore necessary to make yourself thoroughly acquainted with its functions and
to carry out practical tests on the various parts in the control system and the machine
settings. Once these are mastered the excellent properties of the machine can be fully
utilized and the component parts will give maximum service life.
Every machine is tested for accuracy and capacity at the factory. Experienced staff
checks both the mechanical and electrical functions according to a standardized
programme, meaning that we can guarantee workmanship of the highest and most
consistent quality.
By following our directions and your own good judgement, we are convinced that your
new machine will give you every satisfaction. However, should any problems arise,
please do not hesitate to contact our dealer or us.
Safety regulations
Used correctly, your machine is one of the best concerning design and safety.
However, any machine which is used incorrectly can be a safety risk. It is of vital
importance, that those who use the machine are informed how to handle it correctly.
They should read and understand these instructions, as well as all plates available on
the machine. Avoiding to follow the safety regulations might cause an accident.
Warning
• Using the machine incorrectly can cause serious accidents.
• The machine has to be installed, used and maintained correctly.
11
Werbung
