Herunterladen Diese Seite drucken

GFP MANUEL 2922 Montageanleitung Seite 9

Werbung

1 1
Anbringen der Frontwandstrebe
Bringen Sie die Fixierungsklammer der Strebe am oberen und unteren Rahmen an und verschrauben
1
Sie diese.
①Insert metal fixings of stud to upper front frame AS and lower front frame AS and fix them with bolts.
Fügen Sie zuerst die Oberseite der Strebe ein, dann die Unterseite und verschrauben Sie die Strebe an
2
②Insert upper side of the front stud at first, then insert its Lower side next to lower front frame AS, and fix
beiden Enden.
them with the bolts at both ends.
beiden Enden.
oberer Frontrahmen
oberer
Frontrahmen
Metallklammer
Metallklammer
Schraube
Schraube
mit Sprengring
mit Sprengring
Metallklammer
Schraube
mit Sprengring
Bodenrahmen
Frontwand
Metallklammer
Schraube
Bodenrahmen
mit Sprengring
Frontwand
1 2
Anbringen des Türstoppers
1
Fixieren Sie den Türstopper (M) provisorisch an die Frontwandstrebe
1. 昀椀xieren Sie den Türstopper (M) provisorisch an die Frontwandstrebe
①Fix the doorstop (M) to front stud temporarily.
2
Nach dem Einhängen der Tür - um mit dieser nicht zu kollidieren - richten Sie den Türanschlag ein,
※After suspending the door, in order not to interfere with it, adjust the doorstop (M) by moving it back,
indem Sie diesen nach vorne oder hinten bewegen - dann 昀椀xieren Sie diesen. (siehe Schritt 17)
indem Sie diesen nach vorne oder hinten bewegen - dann 昀椀xieren Sie diesen.
forth and fix it.
Frontwandstrebe
Seite zur
Öffnung
Türstopper
Metallklammer
Metallklammer
Frontwandstrebe
Frontwandstrebe
Metallklammer
Metallklammer
Türstopper (M)
Frontwandstrebe
Frontwandstrebe
Frontwandstrebe
Paket Nr.
Schrauben
Paket Nr.
Schrauben
Schraube
Türstopper (M)
Packing
Paket Nr.
LM5-0163
LM5-1403
(with spring washer)
Bolt
Schrauben
mit Sprengring !!
8 Stk.
Schraube mit Sprengring. Die Metall-
Schraube
kammer wird mit Schrauben mit Spren-
mit Sprengring
gring verschraubt
昀椀xieren Sie die
Front-strebe mit vier
Schrauben.
LM5-0413
Paket Nr.
Packing
Bolt
LM5-0132
LM5-1468
4 pcs
4 Stk.
① Put the roof from the right end in sequence and fasten bolts to fix
Bolt
Packing
LM5-0923
20 pcs
※ Place it so that the side 「⇒前 屋根」printed on the back faces to the front.
both upper front and back frames.
Packing
LM5-3521
Bolt
14 pcs
① Put Purline from the front to the side stud and fasten the bolts.
② Fasten bolts to fix purline and roof.
LM5-0411
6 Stk.
3 pcs

Werbung

loading

Diese Anleitung auch für:

Lmds-2922