Werbung
Verfügbare Sprachen
Verfügbare Sprachen
①
(1), (2)
Boss
⑥
Approx. 1/3
5. Intall the Center Stand Plate (R) ② , Spring Plate No.1 ④ , Spring
Plate No.2 ⑤ and Springs ⑥ to the Center Stand ① as shown.
・ Springs ⑥ can be installed easily as the operation below.
(1) Insert 1/3 of the boss of the Center Stand Plate (R) ② to the
Center Stand ① .
(2) Turn the Center Stand Plate (R) ② upward and install the
Springs ⑥ .
(3) Strike the Center Stand Plate (R) ② little by little with plastic
hammer to insert by turning the Center Stand Plate (R) ②
downward.
・ Be careful of the direction of the Springs ⑥ when installing
them.
6. Attach the Washer (Φ35) ⑩ and Circlip (L) ⑪ to the Center Stand
Plate (R) ② .
⑥
⑤
⑪
(3)
②
GENUINE SUZUKI ACCESSORIES
④
⑩
Boss
②
9/15
②
Werbung
