Suzuki 42100-4883 Montageanleitung Seite 12

12/15
13. Stand the motorcycle with
the side stand and check
t h a t c l e a r a n c e b e t w e e n
the left shoe and the lower
surface of the swinging arm
is more than 20 mm.
If clearance is less than 20
mm, there is a possibility that
the center stand is installed
in twisted condition.
Loosen the Bolt (M10X25) ⑮
and Bolt (M10X20) ⑰ which
fi x the Center Stand Plate (L)
③ , and tighten them again.
Bolt (M10X25) ⑮ :
Bolt (M10X20) ⑰ :
GENUINE SUZUKI ACCESSORIES
53.0 N . m
(5.4 kgf-m, 39.1 lbf-ft)
53.0 N . m
(5.4 kgf-m, 39.1 lbf-ft)
20 mm