Frequency Setting Instructions; Vfo Frequency Setting Mode / Mr Memory Channel Mode Instructions - Maas AHT-3-UV Bedienungsanleitung

Frequency Setting Instructions：
1. Use numeric keypad to input the VHF & UHF frequency values that is nothing to do with Frequency
STEP at the A/B Band display indicator. Alternatively, turn the Manual/Frequency/Channel Switch to
increase or reduce the frequency values based on Frequency STEP (refer to Funct i ons Tabl e i t em
1–STEP).
2. Press & hold
the order of scanning. Turn clockwise to scan frequency in ascending order, turn anti-clockwise to scan
in descending order.
A/B Frequency setting Instructions：
1. Upper Row of Display : A Band Indicator. Lower Row of Display: B Band Indicator. Both A/B Bands
accept VHF or UHF frequency setting. When arrow indicates A Band, transceiver will transmit from
preset A Band frequency if user presses PTT button to talk. To transmit from B Band, press AB keypad.
2. Press & hold AB keypad to operate using single band, arrow indicates the selected A or B Band; Press
AB keypad again to switch to the other Band. Press & hold AB keypad again to revert to normal A/B
bands mode.
VFO Frequency setting mode / MR memory channel mode instructions：
VFO MR keypad function:
VFO (Frequency setting mode) → MR (memory channel mode) → MR (Channel + Frequency Display) →
MR (channel name display) → VFO (Frequency setting mode)
＊Note：VFO mode - Please refer to frequency setting instructions.
＊Note：MR mode – Please refer to Functions Table item 19 – CH-MEM.
to enter scanning mode; turn the Manual/Frequency/Channel Switch to reverse
12