Technical Specifications - STEINEL True Presence COM1/ COM2/BT IPD UP Bedienungsanleitung

iOS
LED function
Initialisation: LED flashes blue.
Normal mode: LED OFF
Bluetooth connection active:
LED is flashes slowly in blue.
Hallway test mode, movement:
LED permanently lights up green
Hallway movement test mode no
movement:
LED permanently lights up red
True Presence calibration process:
LED permanently lights up white
7. Maintenance and care
The product requires no maintenance.
The sensor can be cleaned with a damp
cloth (without detergents) if dirty.
8. Disposal
Electrical and electronic equipment, acces-
sories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as
domestic waste.
EU countries only
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
9. Conformity
STEINEL Vertrieb GmbH hereby declares
that the True Presence COM1/COM2/
BT IPD / Hallway COM1/COM2/BT IPD
radio equipment type conforms to
Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity is
available for downloading from the fol-
lowing Internet address: www.steinel.de
10. Manufacturer's Warranty
As purchaser, you are entitled to your
statutory rights against the vendor. If
these rights exist in your country, they
are neither curtailed nor restricted by
our Warranty Declaration. We guarantee
that your STEINEL Professional sensor
product will remain in perfect condition
and proper working order for a period of
5 years. We guarantee that this product
is free from material-, manufacturing- and
design flaws. In addition, we guarantee
that all electronic components and
cables function in the proper manner and
that all materials used and their surfaces
are without defects.
Making Claims
If you wish to make a claim, please send
your product complete and carriage paid
with the original receipt of purchase,
which must show the date of purchase
and product designation, either to your
retailer or contact us at STEINEL (UK)
Limited, 25 Manasty Road, Axis Park,
Orton Southgate, Peterborough, PE2
6UP, for a returns number. For this rea-
son, we recommend that you keep your
- 20 -
receipt of purchase in a safe place until
the warranty period expires. STEINEL
shall assume no liability for the costs or
G B
risks involved in returning a product.
1 For information on making claims under 3
Y E A R Y E A R
the terms of the warranty, please go to
www.steinel-professional.de/garantie
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY

11. Technical specifications

Dimensions True Presence UP: 103 × 103 × 50
(L × D × H in mm) True Presence AP: 123 × 123 × 45
Hallway UP:
Hallway AP:
Input voltage 220-240 V, 50 / 60 Hz
Power consumption
• Stand-by True Presence:
Hallway:
Capacity, Incandescent/halogen lamp load
switching output 1: Fluorescent lamps, electronic ballast
Fluorescent lamps, uncorrected
(COM 1/COM 2)
Fluorescent lamps, series-corrected
Fluorescent lamps, parallel-corrected
Low-voltage halogen lamps
LED < 2 W
2 W < LED < 8 W
LED > 8 W
Capacitive load
Capacity, max. 230 W/230 V
switching output 2: max. 1 A (cos φ = 1) for HVAC
(COM 2 only) (heating/ventilation/air-conditioning)
Time setting COM1 relay
Hallway: 10 s - 60 min / IQ mode
True Presence: 30 s - 60 min / IQ mode
COM2 relay
Stay-ON time: 1 min - 120 min
Switch-ON delay: 0 min - 10 min
Twilight setting 2-2000 lux
Reach True Presence:
Ø 9 m True Presence (mounted up to a height of max. 4 m)
Ø 15 m presence
Ø 15 m movement
(can be set to within one centimetre)
Hallway: 25 × 3 m x 2.8 m
If you have a warranty claim or would
like to ask any question regarding your
product, you are welcome to call us
at any time on our Service Hotline
01733 366700.
5
Y E A R
MANUFACTURER'S
WARRANTY
103 × 103 × 66.5
123 × 123 × 62
< 1 W
< 0.5 W
2000 W
1500 W
1000 VA
1000 VA
2000 VA
- 21 -
400 VA
100 W
300 W
600 W
176 μF