IFM Electronic A5interface AC2410 Montageanleitung Seite 6

Pin connection of the inputs
inputs
3 4
5
2 1
M12 socket
sensor supply L+
sensor supply L-
data input
functional earth
Operation
Check the safe functioning of the unit. Display by LEDs:
• LED 1 yellow:
• LED 2 green:
• LED 3 red is lit:
• LED 3 red flashes:
Overload and short circuit of the input supply are signalled to the
AS-i master (version 2.1) via the "periphery fault" flag in the sta-
tus register.
Maintenance
The operation of the module is maintenance-free.
Always exchange the upper part and lower part at the same time.
Technical data
You can download the data sheet from the Internet address
www.ifm-electronic.com if required.
6
PAGE
pin
1
3
2+4
5
input switched
AS-i supply voltage o.k.
AS-i communication error, slave does not
participate in the "normal" exchange of
data, e.g. slave address 0
periphery fault, e.g. sensor supply
overloaded or shorted