Akrapovic Slip-On Line Einbauanleitung Seite 6

www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the motorcycle on a side stand, we recommend a central racing stand. Make sure, that surface is solid and flat.
2. Unscrew marked bolt and carefully slide plastic heat shield off the motorcycle in marked direction (F 01).
IMPORTANT: be careful not to damage any part of the motorcycle during this procedure!
3. Unscrew marked bolts and carefully remove aluminium heat shield off the stock exhaust (F 02).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
F 01
F 02
6 / 20