ABB 6136/100C-102-500 Bedienungsanleitung Seite 77

Activation/ ● To activate/inactivate the message centre,
inactivati- select the "Message system" page and
on of then the button "Activate/Inactivate Alarm
message System".
centre
The operating status of the message
system is shown by a symbol.
● After selecting "Armed" or "Disarmed", you
will be requested to enter the PIN code.
● After confirming the entry with the "OK"
button, the message centre is activated or
inactivated.
The PIN code can be changed only when the message centre is inactive.
ENG
Fig. 55
Fig. 56
Fig. 57
33